I-DC01 Ingqele eqengqelekileyo yentsimbi yentsimbi I-DIN EN 10130 10209 DIN 1623

DC01 Cold rolled steel sheet coil DIN EN 10130 10209 DIN 1623 Featured Image

Inkcazo emfutshane:

INTSIMBI EBANDAYO EBANDAYO IPHEPHA NEEKHOyili - (DC01 I-BS EN 10130: 2006)

Ingqele eqengqelekileyo intsimbi, (ihlala ibizwa ngokuba yiCold iyancitshiswa okanye CR), yimveliso yekhabhoni esezantsi, eveliswa kusetyenziswa eluhlaza izinto njengecoke kunye namalahle e intsimbi amatye okusila kwihlabathi liphela.

Isinyithi se-DC01 (1.0330 izintoUmgangatho waseYurophu ojikeleze ingqele nekhabhoni esezantsi intsimbi imveliso tyaba for ebandayo bokwakha. … Ukongeza, le intsimbi ikwasetyenziswa phantsi kweemeko zombane. Ukuchongwa kwe intsimbi ngu DC01+ ZE (okanye 1.0330 + ZE), kwaye umgangatho ngu-EN 10152

Thumela i-imeyile kuthi

Iinkcukacha Product

Iimpawu zemveliso

Ingqele eqengqelekileyo yesinyithi ngokwe-DIN EN 10130, 10209 kunye ne-DIN 1623
Omnye wabakhokeli be-Strip Steel Strip ababoneleli e-China, behambisa i-DC01 kwi-DIN EN 10139, i-Cold eqengqiwe engafakwanga i-Strip Steel Strip yokwenza ubanda, i-BS 1449 CS1, i-DC03 ukuya kwi-DIN EN 10139, i-Cold eqengqiwe engafakwanga i-Strip ye-Steel Strip yokubanda okubandayo, i-BS I-1449 CS1 / CS3 kunye ne-DC06 ukuya kwi-DIN EN 10139, Ingqele eqengqelekiweyo engafakwanga i-Strip yentsimbi enobumba bokwakha ebandayo, BS 1449 CS4

Idatha yobugcisa

Ingqele eqengqelekileyo yesinyithi ngokwe-DIN EN 10130, 10209 kunye ne-DIN 1623

Umgangatho	Ulwalathiso Testing	Izinto-Hayi.	Inqaku lesivuno Rp0,2 (MPa)	Tensile amandla Rm (MPA)	Ukudibanisa i-A80 (in%) min.	r-Ixabiso 90 ° min.	n-Ixabiso 90 ° min.	Inkcazo yakudala
DC01	Q	1.0330	80280	270 - 410	28			St 12-03
DC03	Q	1.0347	40240	270 - 370	34	1,30		I-13-03
DC04	Q	1.0338	10210	270 - 350	38	1,60	0,18	St 14-03
DC05	Q	1.0312	180	270 - 330	40	1,90	0,20	I-15-03
DC06	Q	1.0873	70170	270 - 330	41	2,10	0,22
DC07	Q	1.0898	150	250 - 310	44	2,50	0,23

Umgangatho	Ulwalathiso Testing	Izinto-Hayi.	Inqaku lesivuno Rp0,2 (MPa)	Tensile amandla Rm (MPA)	Ukudibanisa i-A80 (in%) min.	r-Ixabiso 90 ° min.	n-Ixabiso 90 ° min.
DC01EK	Q	1.0390	≤270	270 - 390	30
DC04EK	Q	1.0392	≤220	270 - 350	36
DC05EK	Q	1.0386	≤220	270 - 350	36	1,50
DC06EK	Q	1.0869	90190	270 - 350	38	1,60
DC03ED	Q	1.0399	40240	270 - 370	34
DC04ED	Q	1.0394	10210	270 - 350	38
DC06ED	Q	1.0872	90190	270 - 350	38	1,60

Umgangatho	Ulwalathiso Testing	Izinto-Hayi.	Inqaku lesivuno Rp0,2 (MPa)	TensileRR (MPA)	Ukudibanisa i-A80 (in%) min.	I-DIN 1623 T2 (indala)
S215G	Q	1.0116G	215	360 - 510	20	St 37-3G
S245G	Q	1.0144G	245	430 - 580	18	ISt 44-3G
S325G	Q	1.0570G	25325	510 - 680	16	St 52-3G

Intsimbi ebandayo eqengqelekileyo ikwayinxalenye yemveliso yethu. Intsimbi ebandayo eqengqelekileyo ibalasele ukuyila okubandayo. Eli qela lemveliso labela amabakala DC01 ukuya kwi-DC07, DC01EK ukuya kwi-DC06EK, DC03ED ukuya kwi-DC06ED kunye ne-S215G ukuya kwi-S325G.

Amabanga ahlelwa ngokobuninzi bamandla esivunyiweyo ubuninzi kwaye anokwahlulwa ngolu hlobo lulandelayo.
DC01-Eli banga linokusetyenziselwa ukwenza umsebenzi olula, umzekelo, ukugoba, ukwenza i-embossing, ukukhangela i-beading kunye nokutsala kuyasetyenziswa.
DC03-Eli banga lilungele ukwenza iimfuno ezinje ngokuzoba okunzulu kunye neeprofayili ezinzima ezifanelekileyo.
DC04 -Umgangatho ulungele iimfuno eziphezulu zokumila.
DC05-Eli nqanaba le-thermoforming lilungele iimfuno eziphezulu zokwenza.
DC06 -Umgangatho okhethekileyo wokuzoba ulungele iimfuno eziphezulu zokumka.
DC07-Lo mgangatho wokuzoba ubunzulu ogqibeleleyo ulungele iimfuno zokugqwesa kakhulu.

Amabakala e-Enamelled
Amanqanaba esinyithi i-DC01EK, i-DC04EK kunye ne-DC06EK afanelekile kulungelelwaniso olunye okanye umaleko ophindwe kabini.

Amanqanaba esinyithi i-DC06ED, i-DE04ED kunye ne-DC06ED afanele ukuthanjiswa ngokuthe ngqo kunye nokunyanzeliswa ngokungqinelana nolwahlulo-mbini / indlela enye yokudubula kunye nokusetyenziswa okukhethekileyo kokufakwa kumaleyibhuli okuphambuka okuphambeneyo.

Uhlobo lomphezulu

Umphezulu A
Iimpazamo ezinje ngee pores, iigroves ezincinci, iintsumpa ezincinci, ukukrwela okuncinci kunye nokuqaqamba kombala okungachaphazeli ukubanakho ukubumba ngokutsha kunye nokubambelela kwinto yokwaleka komhlaba kuvunyelwe.

Umphezulu B
Icala elingcono kufuneka likhululeke kwiziphene ukuze ukubonakala okufana kokugqitywa komgangatho okanye ukutyabeka ngombane kungaphazamiseki. Elinye icala kufuneka okungenani lihlangabezane neemfuno zohlobo A lomhlaba.

Umphezulu wokugqiba
Ukugqitywa komphezulu kunokuba kugudile, buthuntu okanye kube krwada. Ukuba akukho zinkcukacha zinikiweyo xa usenza iodolo, ukugqitywa komphezulu kuya kusiwa kugqitywe matt. Ukugqitywa komphezulu womhlaba odwelisiweyo kuyahambelana namaxabiso erhabaxa embindini kule tafile ilandelayo kwaye kufuneka kuvavanywe ngokungqinelana ne-EN 10049.

Umphezulu wokugqiba	uphawu	Umndilili wokugqiba umphezulu (ixabiso lomda: 0,8mm)
Iflethi ekhethekileyo	b	I-Ra ≤ 0,4 µm
tyaba	g	I-Ra ≤ 0,9 µm
Mat	m	0,60 ˂m ˂ Ra ≤ 1,9 µm
erhabaxa	r	Ngama-1,6 µm